Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 06/30/2019 in all areas

  1. Disable seat belt chime in a BF 1/Park brake on. 2/Gearshift in Park(Auto),Neutral(Manual) 3/Ignition in "OFF" position. 4/All doors closed. 5/Buckle Drivers seat belt. 6/Turn ignition to the "ON" position(Do not start the engine). 7/Wait until the seat belt warning light turns off. 8/Press and "HOLD" Hazard button. 9/Unbuckle drivers seat belt. 10/Buckle drivers seat belt. 11/Release Hazard button. Confirmation of disabling the belt minder is provided by seat belt warning lamp flashing 5 times. To re enable it simply carry out the same procedure.
    1 point
  2. Well this morning I downloaded PCMTEC and did the programming myself. Using information from members like Whiteford, doing some more research myself in regards to the wiring (I did my best in every instance to get professionals or workshop data to confirm this aspect) and looking at data from a manual strategy was able to get it all up and going. The software itself is fantastic, a real credit to the team and given my experience would highly recommend it to any educated enthusiasts or any professional in the industry. It makes an unbelievable platform so much more powerful too. So impressive! Thanks again to everyone who has contributed. I'm going to go over things and document my work if anyone decides to take this on themselves. Regards, JT
    1 point
×
×
  • Create New...