I've got a 2004 BA Falcon XT (9/2004) which did not originally have cruise control. I have installed all the cruise control hardware, however I am having trouble getting the cruise control to work.
I have recently converted the car from auto to manual using the driveline components from a wrecked 2004 BA XR6 Manual (including 3.45 LSD).
I originally tried to use the PCM from the wrecked manual XR6, which did work, however I had trouble with the speedo not working due to the wrecked car having a 4 channel ABS module for traction control, where as my car has 3 channel ABS and for some reason this was causing my speedo to not work. I did note at the time however, the "CRUISE" word would appear on the cluster LCD when the cruise button on the steering wheel was pressed, which indicated the cruise hardware should be wired up correctly. I could not test the cruise though, as the speedo wasn't working which would obviously be required for cruise control to function.
So with the speedo not working, I gave up on getting the manual PCM to work with my 3 channel ABS module, so I went back to using the original auto PCM and successfully configured it to work with the manual. (everything working except the newly added cruise control).
Using PCMTEC, I've changed a number of different parameters, all in an attempt to enable cruise control. I have not been successful so far. Currently using my original auto PCM (configured to manual), the cluster will not even show "CRUISE" on the LCD. The cruise buttons do nothing.
Any ideas how I can enable cruise control? Any help would be greatly appreciated!
PS: I've attached screenshots of my current PCM file showing a bunch of parameters I've tried altering so far and vehicle configuration details.
Cheers,
James