Jump to content

SASV

Members
  • Posts

    3
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

SASV's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Yes. The FGX Tremec TR6060 with an XR6 doesn't have a speed sensor. The only electrics to the gearbox is the reverse lock out solenoid and the reverse light switch. Thanks again guys, we'll have a go at fixing this cruise control issue with PCMtec software early next week and I'll let you know how we go.
  2. Thanks guys, that explains it with a minimum and maximum threshold for each gear ratio is the reason cruise still works in 3rd and 4th gear and has shut down with the revised ratios on 5th and 6th. Just to confirm, will the professional system access this or do we need the workshop version?
  3. We've got an FGX XR6 6 speed manual ute (non turbo) with a close ratio 5th and 6th gear fitted and since the ratio change, cruise control won't work in 5th and 6th gear and only works in 3rd and 4th. We can't remedy the problem with SCT or HP Tuners software however it's been suggested that PCMtech software likely will access the areas possibly the VID block we need to alter. Does anyone know if there are in fact areas in the PCMtec software accessing gear ratio parameters in relation to cruise control? There appears to be a factory preset of speed vs RPM and with the higher RPM of a lower ratio 5th and 6th gear showing effects like a slipping clutch prevents the cruise control from setting.
×
×
  • Create New...