Jump to content

6 speed auto link


Cvp

Recommended Posts

15 hours ago, Roland@pcmtec said:

Not possible in a BA. You will need to convert to a BF loom and PCM. 

The BA never came with a 6 speed auto so it does not have the required software to speak to it. The BA PCM is a different CPU to the bf and fg so you can't upgrade it either. 

Sorry Roland I was confused it is a bf and was a manual now a six speed can I link it with pcmtec

Link to comment
Share on other sites

No you can't link it, you need IDS or Forscan to do a parameter reset if you've been mixing and matching modules. IDS won't let you flash the TCM though. 

You can flash in the correct calibrations with pcmtec if you know what they should be. There are 900 to choose from so you need to already know what the calibrations codes should be. Once you done that if you do a parameter reset you should be on your way. 

This isn't something we officially support due to how much support time conversions consume. Though people do use our software to do this kind of thing. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...