Jump to content

Vehicle security access status denied


Stevew

Recommended Posts

Hi

I did sort of ask about this in another thread but i figured i should start a new one. I had a laptop die while flashing the other night, i re-flashed successfully and the car fired up fine. The next morning the car would crank fine but would not fire. I fired up forscan and am getting output from all the sensors but i also noticed the vehicle security access status in forscan has denied as the status. what is the possibility that i have cooked the PCM? Also tried a second key in case my main key just died but still the same outcome. The smart shield light on the dash does go out when i turn the key just not sure about the status denied. 

Link to comment
Share on other sites

  • 2 years later...

Hello,

I'm Emmanuel. Thank you for accepting me.  I found PCMTEC  when trying to find a solution to a 2008 Ford Focus Cmax TDCI 1.6L  VEHICLE SECURITY ACCESS STATUS DENIED.

The engine cranks but does not start. Two keys programmed successfully, module initialization done, all with ForScan .

PCM Live data indicates: vehicle security access status denied.  The injector pump supplies fuel to the injectors but the injectors are not supplying fuel to start engine. 

Any help will be appreciated.

Thank you.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...