TehNewbie

Hi Bill, Turns out my issue was using an OBD splitter to get multiple OBD ports for gauges. When I go direct, problem solved. Thanks for the help.

Hi bill, you are right. Thanks for the help, silly mistake overlooked as I was updating the software. Now I am trying to read the PCM, I get a few % and get Flash error. See attached pic. any clue?

Hi guys, I have the (attached image) error, and I can’t read my PCM at all. I’ve asked a few people, and no one has seen this error before… does anyone have any idea? I can still start and drive my car. But I just can’t read the tune no matter what!!! thanks for the help I’m advance!

Total cost is 10 credits. Refer to:

Is there a way to alter proportional gain on stock OS for idle? Tried searching for spark gain etc but couldn’t find anything. It must be right there but I’m blind.

Anyone got decent ghost cam results on E85 ?

Hi, I’m wondering if anyone knows the catch code or strategy code to an FG eGas vehicle. Trying to get my hands on a stock read. While on this topic I’d also be interested in getting the code for an EcoLPI so I may compare the two. Thanks!

I’m located in Melbourne so Victoria. I wouldn’t mind that but I’m unsure who could offer this.

Am currently tuning my own car and was wondering if anyone could help me out / point me in the right direction in regards to ZF tuning. Have got all the engine tuning sorted out (HP Academy was very helpful for bulk knowledge gain in short amount of time !) Am now a lot more confident with the use of PCMTec and love all the features that it has to offer. I've started by flashing the FGX sprint ZF tune. From that I have raised the line pressures by that of 10% (predominantly so in high areas). Also have reduced slip time by 20% and added a little extra torque reduction in the high load sections (have also updated Engine Torque table in high load / rpm areas to reflect more torque). Anyone able to chime in (or PM me) if this seems like a reasonable or bad approach, or what you would suggest? I can’t find any example ZF tunes online so would appreciate any help! Thanks!