rfh

Awesome info gents, Thank you

Hey guys, Does anyone know what the CRC acronym is? (CRC slip time) Thanks Rob

Hey Guys Is there any scenario you can think of where auF0056 would need to be altered, or is auF0061 usually the go to for mixture adjustments? (Standard injectors) Thanks Rob

Hey Guys When the inlet cam is reading zero degrees, is this the point when the valve begins to open when the engine is bang on TDC or is it lobe centerline? Positive numbers = more advance? Negative numbers = more retard? Thanks Rob

Much appreciated Roland

Hey Guys Could someone please clarify when the spark source is "base" , which spark table is the pcm accessing? HAEDJK6 Thanks Rob

Yep... same ground point. 4 different multimeters and getting a slightly different result each time so... Back to back the logger with the innovate logworks serial output and adjusted till they matched.

Hjtrbo, Well over my head mate, thank you though.

Yeah, Innovate LC1 Sounds like an interesting project..

Thank You Bill.. Have loaded the following from their page : Connection success.... Has anyone seen any variation in voltage displayed in the logger vs a multimeter on the dlp terminals? I am seeing 5.03 meter vs 4.93 on the logger... will need to check for difference from the innovate software vs the logger.... Cheers

Hey Guys Just having issues with a DLP, showing this..... So I thought I might have a dud DLP until I checked the other one.. (I ordered 2) Same story. Any Ideas?? Editor Version 2.11.8175.27682 Cheers Rob

Saturday night again..............

Chhers Mate

Open loop.... Relative.... Saturday nights......

My thoughts exactly.. Idle tps A/D is about 135 As for other scaler tweaks, they are: So maybe the A/d of 60 to transition to open open is a relitive measurement?? Cheers Rob