g,day, Im new to all this data logging and have notice a spike on my cam overlap that jumps to over 200 degress at the start of log at idle. then on a pull after that it made a pop noise that sounded like from exhaust and engine cut out. started up straight away and idle,drove fine after woulds. is a 2003 ba ford xr6t ute have just replaced waste gate solenoid day before as was boosting over 20psi motor is built but has all stock exhaust, intake intercooler and wastegate.
all ive done was up the idle through pcmtec
dtc codes
P0320-63 engine speed output signal error
P1270-63 vehicle over speed condition
P2105-63 eletronically controled throttle motor error
P2110-63 throttle actuator control system - forced limited rpm
4584rpm exhaust pop engine dies.teclog
