alexE85

Hey guys, im using proffessional version, was wondering how to turn off injector high slope, i was shown before but ive forgotten

ok so now it idles good and drives good, AFRs are sitting around 11.8-13 on the guage, last issue im having is its boost cutting, it will go up to 7psi then cut out, just want to know if the preset tune will only allow it to go to the desired 6.5psi as per factory or if because its a gt42 it may be out on a certain table... otherwise might be an issue with the solenoid? ( i want it at 6.5psi)

thankyou for the info so far, realistically i just need to know what exactly to tweak to get me driving until i can afford a full tune and valve springs, if i can get the idle and load right for 6psi im happy. so SDT is the one i want correct?

hey guys, newbie to pcmtec, i have a BA barra turbo, mods are bosch 1000 inj. walbro 525, e85, 4inch exhaust and gt4202, unopened engine. ive used one of these threads input injector data, i was wondering if anyone has a running fuel and spark map tune to see myself around 350-450whp before the valve springs start holding open so i can drive my ute over the christmas break. its starts and idles on the given injector inputs. i couldnt understand the given spark maps for idle and drive (auto), its preset to 63° what should i be setting it at for e85? i have the profession version. i also couldnt find the input disired stoich and ethanol input