Jump to content

Blackxr6t

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by Blackxr6t

  1. Yeah there seems to some confusion out there about resetting the PCM adaptations also resetting the TCM at the same time. I have just cconceded that the transmission will need replacing and have found one with matching hardware and software tcm codes.
  2. I understand, but I only want the reset function as a service function, i have no interest in any of the zf tuning features of the workshop version. After calling a few transmission places you could actually release a tailored "zf adaptation reset" tool and sell this to the service market rather than just tuners. However this would need to under cut ford's IDS software in cost per use.
  3. Any chance it could be added to the professional version? Resetting the tcm adaptations is important when moving the zf mechatronics unit (which includes the TCM) from one box to another as the clutch wear will not be the same between the boxes. Interestingly the BMW guys reguarly reset the zf adaptions however there seems to be no affordable way to do it with the falcons.
  4. Hi Roland, Can I change this value in the professional version or do I need the workshop version?
×
×
  • Create New...