Jump to content

TommyH

Members
  • Posts

    18
  • Joined

  • Last visited

Everything posted by TommyH

  1. i clicked on to the digikey website and it states 12 week leadtime for the dlp108, is this the only unit compatible with pcmtec? im not tech savvy so excuse the question .
  2. I can definitely tell you from experience that btr can last for a long time with 450rwkw. ive had friction plates with the writing still on them after 100k . Don't give up on the btr they are a great box when built and tuned correctly .
  3. Ah ok good to know . Thanks for your reply .
  4. Can someone confirm if in the datalogger that N is exact rpm of the vehicle . Reason why i ask is that i have logged N -rpm on a private road and it reached 7080 rpm, but in the editor itself soft cut is at 6300 and fuel cut is 6700. tune is a custom os boost by speed.
  5. TommyH

    Pats error

    I see, I thought it was something to do with fuel pressure as I went from 52psi to 42 psi at idle didnot think it was related to my pats issue hence not mentioned . till I went searching online this afternoon . also did not write the file as I am still trying to understand a couple of things , one is that my pcm has a 32HE tag and pcmtech shows me that I have a A3HD , and how all this mis matching works . Now that it’s on the forum if someone has similiar issues , I guess they have a pathway to check .
  6. TommyH

    Pats error

    Yes bill hooten tried to read it on his workbench and it failed . Other issues I had was dropping cylinders , fuel pressure and or injector drivers . I had read previously a week ago and had opted for the recovery mode and licenced it . did a pats reset on forescan cause now I could connect to it , but could t connect yesterday , kept saying turn ignition on when it was on . last week didn’t have a issue with forscan connecting either .
  7. TommyH

    Pats error

    Yep confirmed ,ecu was the issue ,
  8. TommyH

    Pats error

    Not there yet but almost done
  9. TommyH

    Pats error

    After changing out the bem still had the same issue , forescan would not connect , ended up getting in contact with bill hooten who checked the pcm, can’t thank him enough … seems that was the issue. forescan is connecting and currently doing a pats reset with new pcm .
  10. TommyH

    Pats error

    Yeh I have someone coming tomorrow with a bem , current one is blue I think 🤔 and changing to a green one , and can do keys also . I have one original key and also 2 others cloned when my kids lost the original . cheers Bill for your input , much appreciated .
  11. TommyH

    Pats error

    Cheers for that , I contacted the mechanic he mentioned that the code was b1601-60
  12. TommyH

    Pats error

    Thanks bill , I’ve tried to connect forscan , keeps saying turn on ignition when it is actually switched on . just had a auto locksmith he thinks that it’s not the keys , as the flashing hand switches off and reads correctly and said perhaps pcm . will go over the things you mentioned and try to hunt it down .
  13. TommyH

    Pats error

    Ok didn’t take note of fault code by mechanic but read pats error
  14. TommyH

    Pats error

    Nothing has been flashed to the pcm still retains a tuned file by sct, only read file done in pcmtech . the red hand goes off once ignition is turned on , but still has a pats error . fault code was read by mechanics scan tool , can’t connect dtc with pcmtech or hptuners or forscan . forscan comes up with turn ignition on to connect but ignition is on was thinking perhaps bcm error ? Not sure on these ba’s .
  15. TommyH

    Pats error

    Ba falcon has been running then all of a sudden 3 of my keys won’t talk to the car. diagnostic tool says pats error . what could be the issue ? Battery is fully charged . pumps don’t prime with ignition on but all dash lights work , and does not crank
  16. Sounds great, anything to help minimise the risk of a failed engine . thankyou guys .
  17. My friend has used his workshop edition pcmtech to try to read a tuned sct file on a vehicle . For some reason it cannot read, the vin comes up with Au xxxxxsct , is this locked by sct3 ?? (Xcal3) . even the xcal3 can’t scan for diagnostics /codes. ho tuners cannot even connect at all , protocol error . any inputs would be greatly appreciated on how to view the tuned file.
  18. Is there a possibility of shutdown on reduced fuel pressure??
×
×
  • Create New...