[zf tuning]

34 minutes ago, Roland@pcmtec said:

It is a very complicated process. We have someone working on training material for ZF tuning at the moment which will eventually be a paid course. If you are interested in doing some paid training we can put you in contact with them.

is zf tuning the only training package being put together Roland?

[ECU Wiring FGX]

you can indeed. they stamp the bottom of them with a barcode that is unique to your subscription so if you were to upload them publicly they would know. personal use though, not a drama.

[ECU Wiring FGX]

i thought the fingerprint was just the barcode on the bottom of each page?

[Downstream O2 Sensors]

On 6/24/2019 at 12:02 PM, Roland@pcmtec said:

If you are curious have a read of the various patents Ford have filed over the years regarding downstream O2 sensors. They go into quite a bit of detail.

https://patents.google.com/patent/US6879906

Those Ford patents are awesome.

So helpful to understand the theory from Ford's perspective.

[HOWTO: FG ZF6 to Manual conversion CAN bus wiring issues]

On 2/23/2019 at 11:04 AM, Roland@pcmtec said:

I mean loop the canbus wires. If you don't do that the canbus will be broken and nothing will work. 

Where does a manual's pcm's C20 loom side pink and brown go? or is it just an internal diode on those?

[Holding revs]

it's same mate

[HOWTO: FG ZF6 to Manual conversion CAN bus wiring issues]

On 2/21/2019 at 11:24 AM, Roland@pcmtec said:

If you keep the auto loom and do all of this there is a modification that must be done (and probably others but definitely this one needs doing).

What do you mean "do all of this" Roland?

With the above wiring mod done and the can circuit communicating again, is it not just a matter of uploading a suitable OSID eg a manual fg xr6t in place of the auto OSID?

Do all the other modules such as BCM, ICC have to be reprogrammed individually?

[DATA LOGGER]

may be a silly question, but what would be required to log directly to the tactrix using the microSD port?