Jump to content

BarbysG6E

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by BarbysG6E

  1. I wonder what triggers the fan to stay on after the key is out sometimes after a decent flogging
  2. Thank you for the response I thought that might be the case, my elm went straight in the bin it was dead on arrival a few years back
  3. Is there a way to use the Openport 2.0 adaptor the access MS CAN with forscan I need to disable police mode in a G6E but I can't pick-up the instrument cluster? I know the eBay spec elm adaptors have a manual switch but I only have the op 2.0
  4. Out of curiosity I tried this on my mates straight piped BA, sitting on the 3k neutral limiter was deafening and made for a fun Saturday night! Thanks for the advice 🙂 I'll put up a video later
  5. I was finally able to try a few different settings results in the video. - ETC disabled via auF0265 & auf0264 - auF1479 set to 0.8 Lambda - RPM limit 4850 and fuel cut 5000rpm for testing - Time and amount that rpm limit can be exceeded both set to 0 - auF0262 Engine speed limiting set to 0.6 - auF0261 Engine speed limiting set to 1 Im going for something more agressive similar to @misk any feedback would be appreciated 20220223_184615_2.mp4
  6. Has anyone successfully changed from the soft limiter to something that resembles the classic "wun-dun" from the sohc? Looking at certain settings under RPM limit but I haven't tried anything yet looking for some input 😀 cheers
  7. I'm looking to experiment with Ghost cams, some decel crackles etc. Just wondering if PCMTec professional would give me access to the required parameters to do this with a SY 2007 without having to use workshop features like flashing a different OS? I understand that multitune via cruise control won't be available Thanks Guys
×
×
  • Create New...