Search the Community
Showing results for tags 'first time use'.
Once you have registered and received your order confirmation go to the download link here: https://www.pcmtec.com/downloads You can then download the full version of the software from this link: Download and Install the program. .Net 4.7.1 is required as well so if that is not installed on your computer use the above link to download and install it. If you have done so already install the drivers for the cable you are using. Most customers are using the Tactrix OpenPort 2.0 cable. These drivers for the Taxtrix can be obtained here: https://www.tactrix.com/index.php?option=com_content&view=category&id=38&layout=blog&Itemid=61 Install these drivers as well. Next you will need internet connection to allow the editor to connect to the server for user validation and licensing. Start up the PCMTec Editor and it will ask you to login. You need your email address and the password you registered with: Once you have successfully logged in the Editor is now fully functional. To read from the car connect plug the to Tactrix into the PCM and the cars OBD2 port. Then click on Read/Write Vehicle: By default it will read both the PCM and the ZF TCM, click on Read Flash: You will be asked to license the vehicle. You can choose to do this later by clicking No. Either way choose where you want the read of the vehicle saved and save the file. Editor has now been set up and the vehicle read has been saved. If you want to edit the file and did not license it in the previous step you will need to license it before you start editing: