Flex fuel tuning.

[Yortt]

I now have PCMtec flex fuel software tune up and running a credit to PCMtec custom operating system.  The only problem now is the VCM Suite logging software does not log load or knock so I cannot continue with tuning. Is there any indication when PCMtec logging software will become available?

[Roland@pcmtec]

If you change the osid/strategy back to standard you can still log. 

Logging is in the works. There will be more info when it's ready. 

[Yortt]

That's interesting! If I understand correctly maintain the current custom tune and change the operating system to enable flex fuel logging?  What is the procedure to do this?

[Roland@pcmtec]

Just change the OSID from PCMxx back to HA*** and the strategy from PCMxxyy back to HA***yy

[Yortt]

RE: " change the OSID from PCMxx back to HA*** and the strategy from PCMxxyy back to HA***yy "

I have unsuccessfully tried to do this, what specific steps in your software need to be applied to make the changes indicated.

Thanks

 

 

[Roland@pcmtec]

Change these.

 

Here you would change PCMFE back to HACCK if your original OSID was HACCK

Then if you had PCMFEGA.HEX you would change it back to HACCKGA.HEX where HAACK was the original OSID and GA was the calibration portion of the strategy

Beware that this will now mean you can read/edit the custom OS with other products which may have unintended consequences, so whilst you could read it with other products we don't recommend doing so.