Roland@pcmtec Posted January 19, 2019 Posted January 19, 2019 We now have a new Unit Converter and OSS (output shaft speed)/ Gear Calculator. Dynamic units will be coming soon as well! The gear wizard seen below will automatically load the values from your tune. This makes calculating OSS (output shaft speed) easy for those of your who are tuning the ZF. This is also useful for working out optimal wheel height for a given top speed at the drags. 3 Quote
Roland@pcmtec Posted February 11, 2019 Author Posted February 11, 2019 Dynamic units are not too far away! Edit: as of 1.11 dynamic units are available. 1 Quote
fordsrule Posted August 29, 2019 Posted August 29, 2019 On 1/19/2019 at 7:21 PM, Roland@pcmtec said: We now have a new Unit Converter and OSS (output shaft speed)/ Gear Calculator. Dynamic units will be coming soon as well! The gear wizard seen below will automatically load the values from your tune. This makes calculating OSS (output shaft speed) easy for those of your who are tuning the ZF. This is also useful for working out optimal wheel height for a given top speed at the drags. Hi, I have come back to this for another read and have noticed that this gear wizard is able to pull the relevant data from the tune, is this done automatically? Cheers Quote
Roland@pcmtec Posted August 30, 2019 Author Posted August 30, 2019 Press "load values" and it will load it from the file that is open. 1 Quote
hulk Posted May 12, 2020 Posted May 12, 2020 How can i rescale for the speedo that is out. dyno 107 speedo in the car is reading 100 thanks Quote
Roland@pcmtec Posted May 12, 2020 Author Posted May 12, 2020 Change the axle ratio. If this is a roller dyno it's probably wrong. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.