rileyt Posted July 23 Share Posted July 23 Not seeing any zf parameters do I have them with the professional edition ? Quote Link to comment Share on other sites More sharing options...
Zhuojian@pcmtec Posted July 23 Share Posted July 23 Hi rileyt, Did you read TCM while you were reading the vehicle? You must tick TCM when you do the read if you want to access your TCM parameters. Best regards, 1 Quote Link to comment Share on other sites More sharing options...
rileyt Posted July 23 Author Share Posted July 23 Yeah probably didn't click it but would I be able to see them on the stock files? Quote Link to comment Share on other sites More sharing options...
Zhuojian@pcmtec Posted July 24 Share Posted July 24 Hi rileyt, Yes, you should be able to see the TCM parameters in the stock files. Best regards, Quote Link to comment Share on other sites More sharing options...
Bill Posted July 24 Share Posted July 24 22 hours ago, rileyt said: Yeah probably didn't click it but would I be able to see them on the stock files? Not all stock files have a TCM file that downloads when you download the PCM file or when you download a stock file using the TearTag. You can download another stock file that has the correct TCM file, export the TCM file & import it to the stock PCM file you need. This will give you an all in one stock file 1 Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted July 31 Share Posted July 31 You may have to download the ZF file manually. You can then merge them manually afterwards as Bill said. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.