pravbuilds Posted October 9 Posted October 9 Hey guys, new to PCMTec, still working my head around everything. Have a car that was previously tuned on the same setup - now has a forged motor (otherwise all bolt ons, injectors cams etc are all the same) Previously, when on a complete cold start, it was very choppy but fine once warm, subsequent starts were also fine. Now it's constantly loping - looking at the logs, the VCT overlap is at 35-50 degrees and the ignition timing is swinging all over the place. I've tried to restore all the Variable cam tables to stock, to no avail. What am I missing here? PCME3A4.tec Cold start.teclog Cold start 2.teclog Quote
pravbuilds Posted October 9 Author Posted October 9 Okay so I wasn't missing anything - CAM Sensor wiring was backwards, whoever tinkered with this in the past tried to patch it up but did it incorrectly. All fixed Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.