Jump to content
PCMTEC Forums

Recommended Posts

As we regularly get asked for approximate pricing here is a rough price guideline for Australian workshops, pricing is exclusive of GST. This is for workshops that have a dyno, knock monitoring equipment and mechanics on hand. Smaller shops may be cheaper, larger shops may be more expensive. Overseas pricing will vary.

Pricing does not include mechanical labour, transmission tuning, mechanical inspection or servicing. All major shops will require inspection and servicing on top of these prices. Often this can be quite lengthy if the car is modified and high km. Once again this pricing is only an approximate guideline and there will be mechanical labour charged on top. We have listed some of the common labour items below. 

 

Multi Tune with E85 and 98 Tune

Dyno Time $1400

Credit Fees $500

Starting from $1900 + GST

Labour Items (not included in price above):

Draining tank (surge tanks take much longer)

Testing fuel system (pressure, voltage drop)

Check spark plug gap

Check cold side piping

 

Flex Fuel Tune

Dyno time $1600

Flex Fuel Hardware $1100

Credit Fees $350

Starting from $3050 + GST

Labour Items (not included in price above):

Draining tank and filling to various blends (E0/E10/E42/E70/E85)

Testing fuel system (pressure, voltage drop)

Check spark plug gap

Check cold side piping

 

Single Tune

Dyno time $850

Credit fees $150

Starting from $1000 + GST

Labour Items (not included in price above):

Check spark plug gap

Check cold side piping

 

Ghost cam, boost by gear, launch control,

Typically you would expect to add at least 1-2 hours of dyno time to configure and set up on top of normal pricing.

 

Once again this pricing is only an approximate guideline and there will be mechanical labour charged on top.

Share this post


Link to post
Share on other sites

What brought this thread about? I'm guessing someone's bought a workshop version of PCMTec and is doing Macca's tunes and doesn't know what to charge 🤑

  • Haha 1

Share this post


Link to post
Share on other sites

Mostly due to customers who want a quick rough price without having to get quotes from a workshop. 

Also sometimes people assume its a mail order tune with no labour at all. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...