[HOWTO: Ghost Cam and VCT simplification]

just so i understand with the oil temp cells the overlap wont start till that temperature is reached ?

[ZF6 to turbo 400]

Just now, Puffwagon said:

You'll have a back up of the file but yes, flashing the pcm will overwrite the current file.

If you want to keep the changes you've made after flashing, you'd have to compare your old file, tick the relevant changes you want to keep, apply them to the new file and reflash that into the pcm. It's easy enough to do and doesn't cost anything.

ok that seems nice and easy thank you for the help

[ZF6 to turbo 400]

im quite new to this software but if i flash the pcm will i lose the current changes ive made .

[ZF6 to turbo 400]

4 hours ago, Puffwagon said:

Open the PCMTec program, open the strategy in the program, click Read/Write vehicle, where it says Virtual Read/Partial Write change that to Full Read/Write, click Write Flash etc.

ok thank you for the help im only on the Enthusiast Edition will that have the options i need

[ZF6 to turbo 400]

i have already modified the wiring

im just not sure on changing the strategy are there any articles i can read to help me 

[ZF6 to turbo 400]

hey guys im in the process of switching from the zf6 to turbo 400 in a bf, and was hoping for some information on what i need to change to allow the car to run. im still using the auto pcm 

thanks everyone