Shakeranyday
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Shakeranyday
-
-
Hi guys - There’s a lot of smart cookies on this site. Thought I’d ask if there is a possibility of using PCMtec to mod a ba ecu purely run a btr trans (without running the engine)
bit of background to the question
i have a 351w (adaptronic ecu) with btr behind it and currently I use a EB V8 tcu to control it. Works ok but I can’t modify shift points etc. This uses all factory EB tps, range switch, tail housing speed sensor etc
am I dreaming that this could even be possible on ba ecu without a custom os?
thoughts are
hack up ba loom for what is needed
TPS - use ba pedal (under dash with cable hooked to stock pedal)vss- as per non abs
range switch - as stock
turn off and torque limits
emulate rpm somehow
fit coolant temp sensor for pcu
HOWTO: Run PCM standalone (eg engine swap). PATS disable and Speed Source Setup.
in Falcon HOWTO Guides
Posted
If I have a Bf turbo pcm , ZF6 turbo box, zf shifter, BF turbo ABS and wheel sensors grafted onto another car
If I turn off pats, will these modules still talk together on the can network so I can utilise ABS module to pickup road speed and get the trans to operate properly.
or do I have to keep bem, cluster, keys and code the pats so the abs and tcu will talk to pcm.
thanks for your time