[HOWTO: Ghost Cam and VCT simplification]

On 9/2/2021 at 8:42 PM, Roland@pcmtec said:

Yes but never trust anything you read. Always test to confirm. Try it, datalog and make sure it does what you expect. If it's wrong report back. 

So i followed the steps, and this is the results on a stock FG @ 25 degrees cam overlap....

[HOWTO: Ghost Cam and VCT simplification]

On 7/31/2018 at 2:23 PM, Roland@pcmtec said:

It is also recommended to disable LTFT when the ghost cam is active by adding this to your ghost cam tune. This will prevent closed loop fueling from maxing out adding fuel (auF0164)

Hi Roland, to disable LTFT would change the value from 1 to 0..... very new to pcmtec, thanks