[FGX XR6 cruise control issues after gear ratio change]

On 4/1/2019 at 10:08 AM, Roland@pcmtec said:

If you have the VID block enabled and a car other than FG Mk2 the VID block will override some of these values afaik.

If it doesn't work, how do I disable VID or is that not possible? 

[FGX XR6 cruise control issues after gear ratio change]

On 9/27/2018 at 2:20 PM, Roland@pcmtec said:

As Apoc mentioned above these are the parameters you will want to modify for the gear ratios.

Afaik HPTuners don't have the minimum/maximum ratio mapped which I believe is used for determining an error which is what will be shutting the cruise control down. The min/max are for determining clutch slip. You may find this is causing the throttle to pull under big loads as well as there is clutch slip protection built into the PCM as well which will pull the throttle if the OSS doesn't match the rpm for an extended period of time.

If i have changed my ratio to 3.9 in a manual FG sedan, what do i need to set these parameters to?