[BTR wiring harness to 6Speed ZF wiring]

Perfect thankyou. Yeah mine has been running for two years now just havent gotten around to fixing up the harness as i used a sedan harness and made it work by extending the speakers, indicators and brakes etc. just ended up leaving the rear wiper and squirter jet out 🤣

Now to find the time to do this haha

[BTR wiring harness to 6Speed ZF wiring]

Hey guys, wondering if any who have done a turbo and 6 speed conversion on a wagon retaining the original harness know what needs to be changed from the 4 speed harness to suit the 6 speed harnes, bcm, pcm and airbag unit etc. Havent had allot of luck finding info on it so far. Thanks

[Ford falcon ba/bf Manual ute 10pound REV Cut]

This is his stock file, what might i need to change

[Ford falcon ba/bf Manual ute 10pound REV Cut]

Just now, SmackingUSilly said:

So my brothers 6speed manual turbo went boom and i had a second hand one with a turbosmart accuator on it. He put a 10 pound spring in it and when he comes on high boost 4500 after 2nd gear (progressively lover rpm the higher the gear) it feels like Rev cut. What parameters have people changed to stop this thanks

 

Zac's PCM Tech Stock File.tec

[Ford falcon ba/bf Manual ute 10pound REV Cut]

So my brothers 6speed manual turbo went boom and i had a second hand one with a turbosmart accuator on it. He put a 10 pound spring in it and when he comes on high boost 4500 after 2nd gear (progressively lover rpm the higher the gear) it feels like Rev cut. What parameters have people changed to stop this thanks

[BF Xr6 Turbo Ute 6 Speed Auto Tear Tag]

Thanks mate

[BF Xr6 Turbo Ute 6 Speed Auto Tear Tag]

Also with Traction control, dunno if they dont come with it or not but yeah thanks

 

[BF Xr6 Turbo Ute 6 Speed Auto Tear Tag]

Hey all trying to find tear tag for a BF Xr6 turbo ute 6 Speed Auto. Cheers

[Brakes come on under Load]

I am very new to PCM Tech.

Had a incorrect gear ratio code as donor car for my bf turbo wagon had done a change of paramaters. I changed the diff ratio from 3.45  back to 2.73 for the 6 speed auto as i put a ute 2.73 diff back in the wagon. (Issue has been here all the time)
Issue i get is when under partial and full load usually around 60-80kph it feels like my abs is kicking in. If i accelerate harder it will stop doing for a bit but will eventually come back. Its as if wheels are detecting an abnormality in speed or it thinks its breaking traction and throwing on select brakes as needed.
I had a axle mismatch code until i changed the ratio back but still have same issue. Dont know if anyone has had this issue before, was going to do a datalog on it tomorrow on the way to work but its been pooring rain so dont know if itll be accurate. 

Hoping someone has had a similar issue before as im totally lost right now 😢