[BA throttle dip]

On 11/25/2022 at 6:55 AM, Roland@pcmtec said:

What does torque source say? That will tell you which truncation is kicking in. 

Might be oscillation/ tip in etc

Hi Roland

So if my car is cutting spark and misfiring at say 3k and the torque source says that its tip in Oscillation, stock value is set to 3 should I increase or decrease this value? or should I be looking at something else that is causing it like spark or fuel, I can see that the cat is getting over 800 degrees so from that I guess it's running too rich?

[Street Tuning NA Motors]

Guess i could of just kept the standard ones, but thought I may need them to be abit bigger. I have knock down to basically 0 sometimes creeps to -1 under load. Where do you get a knock listening device that is not too expensive

[Street Tuning NA Motors]

On 10/26/2022 at 5:02 AM, codac said:

Just a note for anyone else doing this on a stock setup, retarding large amounts of timing and enriching fuel for inital safety will result in difficult to control boost on the standard internal wastegate.

Hey Codac have done my BF NA XR6 ute recently, and going through the steps of tuning, don't suppose you can give me some tips on where you added or took out timing and fuel, like as in the screens? Am running the internal gate as well but have 650cc injectors

[Speed Density Tuning]

On 3/10/2020 at 11:11 AM, Roland@pcmtec said:

0 = Not fitted

1 = Fitted

Hi Roland, I have a 2006 bf NA with stock ECU for the Ute, which I have added a turbo to. Would I turn this option off if I have disconnected the vacuum line to the intake? or does it matter