Jump to content

hiboost

Members
  • Posts

    17
  • Joined

  • Last visited

Posts posted by hiboost

  1. Hi all, 

    putting a forward facing plenum on a customers BA xr8 with the ford twin butterfly throttle body (believe same as FG FPV) does anyone know the settings I need to change so I can just get to start an idle? I know these throttle bodies are a pain to tune I just need it to start and idle at this stage.

     

    cheers Neil

  2. Shifts are fine car feels normal slight flare under boost on 3-4 gear change but other than that its fine, haven't checked the cruise to see if that works i'll go check that shortly.

    I might just try flashing it back to std and see if the code stays or goes away before I delve into the tune much further.

     

    Thanks Neil

  3. Hi all,

    Customer has had the diff ratio changed in his 07 BF XR6 turbo with ZF 6speed to 3:23 from 2:73, to change the ratio in the PCM calibration do I just alter auF0394 or is there another area that needs changing?

    I have changed the auF0394 value to 3:23 and when I checked for codes after the road test I have code P1934 vehicle speed signal, car drives okay.

    Thanks Neil

  4. Hi Roland,

    Thanks for the reply, customer just asked me if it was possible for the interim while he's saving to do all the proper upgrades and full tune. But sounds like it may cause more issues then benefits so i'll advise him against it.

    Thanks Neil  

  5. Hi all,

    Does anyone know if it is possible to flash a stock BF F6 auto tune into BF XR6 Turbo auto, or would you have to open both strategies and copy and paste the relevant data and would this flash be possible on the professional level of software.

    And if it is possible where would I find a BF F6 file to load or copy from?

    Thanks Neil 

×
×
  • Create New...