[Ba xr6 turbo auto converted to manual]

On 8/27/2021 at 6:42 AM, westo said:

I’ve recently done a conversion on my ba xr6 turbo to a 5 speed manual. Using auto wiring harness and bridged the gearbox wires, wires in the clutch switch and changed the parameters needed to drive it without going into limp mode, had moderate throttle hang when changing gears so I changed the idle air tables like it said in another post and also changed the dashpot over, I used the f6 ba turbo tune to compare, throttle hang is a lot worse now and it seems I have a dead spot in the throttle just as soon as I touch it, when I fully let off the throttle to change gears it spikes in revs but if I keep my foot on the throttle in this dead spot the revs drop as they should, I’ve data logged the throttle position and it’s showing no input when I let off the throttle but car still revs, I’ve also compared the idle and dashpot to a ba NA manual tune and still no luck. Car still drives fine otherwise so any help appreciated 

Hey man I'm doing a manual conversion on my ba xr6 and was wondering what parameters you changed to get it to drive out of limp home mode?