RAWMotorsport
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by RAWMotorsport
-
-
Hi Matt
anyone else had slow update from the new betas logger, i have been using it over the last 3 days and found it to be slow updating, freezing during a log, I am going to install the software on my second pc to rule it out as an issue but in the previous release it worked like a dream.
-
9 hours ago, Puffwagon said:
Nah I didn't do anything else with it. I ended up running another wg spring and maxing the turbo out like that.
I had a wg reference line come off while messing around with it, made 45psi in the mid and broke a rocker arm as a result. If the motor wasn't built it would have broken a rod or piston too.
Cheers mate
-
On 2/27/2021 at 10:39 PM, Puffwagon said:
I've done this before and it worked fine with the stock wg setup.
Today I hooked up my 4 port ex wg into a 3 port solenoid config through the stock solenoid, with boost to the top and bottom of the gate and bleeding off the top.
I got it in open loop and inverted the OL wgdc table to make it work. I did a couple of other things differently given that it wants to be inverted.
With the table at 100% duty it only made 10psi, even though I have 17psi of spring in there. I then tried the table at 80% and it made roughly 25psi up top, but a bit less lower in the rev range. I didn't go further as I'm on 98oct atm, but will revisit it when I switch back to e85 and send it to the moon again.
Is there a way to set up the wg like this and have the boost control work like usual? I think if you had a solenoid that works inversely to the stock solenoid it would work. I also read that hoontune figured something out and have a solenoid etc for sale, although the post was 3 years old.
Hi Puff
Did you have another play with that wastegate solenoid configuration?Im considering attempting to fit a TS IWG75 twin port to my pulsar 3582r to get a wider range of boost control and have a wee scourge around for info before getting into it.
Data Logging updates
in PCMTec Features
Posted
Yip.
Will install it shortly and do some logging on another pc it is almost identical to this one but slightly newer, I have had an issue with this pc using 1.25 as well but it was sorted a few months back and I never had the issue on my older pc when trialing it with kirby so may be the pc, Ill report back with the results.