BF na xr6 with fg intake hardware hitting ETC error

Hi guys, I recently finnished installing an fg intake manifold, throttle body, fuel rain and injectors into my bf mk2 na xr6. I got an fg stratergy and compared it to my current one. I coppied over almost all of the fg data relating to drive by wire, injectors, dashpot and anything with map or maf. I also copied over a bunch of other stuff that seemed relevant. The car runs and drives well under high load. My issue happens when I am driving in traffic very slowly and need to sit on the pedal at

Thanks. I've had a look at all the IPC related parameters in the compare file. These are the only 2 which came up with a search. These are all the ones different when I look under IPC category. Should i make all of them the same on my car? I found if i make auf2437 the same on my bf as the fg, the car wont start. I had a look for the parameter you mentioned. I'm not sure which one it is. Would it be any of these?: Cheers.