[Datalog injector pulse width]

So would that be in log adjust range min and max?

 

[Datalog injector pulse width]

Hi, on a data log my injector pulse width just read a constant 0 is this because I'm using enthusiast and need to upgarde?

[engine backfire at 4584rpm]

g,day, Im new to all this data logging and have notice a spike on my cam overlap that jumps to over 200 degress at the start of log at idle. then on a pull after that it made a pop noise that sounded like from exhaust and engine cut out. started up straight away and idle,drove fine after woulds. is a 2003 ba ford xr6t ute have just replaced waste gate solenoid day before as was boosting over 20psi motor is built but has all stock exhaust, intake intercooler and wastegate.

all ive done was up the idle through pcmtec

dtc codes

P0320-63    engine speed output signal error

P1270-63        vehicle over speed condition

P2105-63      eletronically controled throttle motor error

P2110-63     throttle actuator control system - forced limited rpm

 

 

 

 

4584rpm exhaust pop engine dies.teclog