Avh1993
-
Posts
18 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Posts posted by Avh1993
-
-
Hey Roland im looking to play around with launch control on a mates car for when we are down at the track i havent had much succes with getting it to work as the one auf location is missing im guessing being a 2010 na fgxr6 its factory manual ill upload the file aswell not sure if i can maybe some how copy it into the file importing as perimeter i wasnt able to datalog it either i also have the pro edition i have uploaded the file to support as well hopefully i can get abit of assistance .
thanks in advanced
HAEDJC5 tcm read and licenced file kades ghost cam tune and launch control.tec
-
I'll have a look thank you
-
here they are mate ill include the log aswell i do notice that the vehicle speed is actually different on the log however most cruising was done between 80 to 100kmh few wot runs up to around 160ish but it doesnt read that on the log could it be that the speedo needed correcting perhaps
HAANFH4 on 9 1 2021 final play around.tec HAANFH4 last tune 9 1 2021.tec 09-01-2021 02-37-13 PM Log alex car.teclog
-
just sent it threw mate
-
I changed a few things on my tune mate using interpolating a few parts over from my other build that's exactly the same set up but for some reason the cruise just speeds up then cuts out even if I set it for 80kmh it speeds up faster
-
Hey lads having a funny issue with my cruise control after a tune when I set it it like speeds up full throttle to around 120kmh then cuts off like the brakes have been touched it worked fine before the tune wondering what Incan go over to have a look to sort it out cheers lads
-
Cheers bud is that a bf f6 or fg couldn't remember when fg started
-
I'll have a look when I get back from work what file I used off memory it was the bf file and mine is a 03 xr6t so won't see why it won't work on newer mate
-
This is a video of mine in my ba xr6t 4 speed it cuts out sometimes but I played with it abit
-
1
-
-
Yes I did actually just seeing if I can get the best scalings available so that I'm closer to fuel trims I'll upload my file a little later that I ayed with
-
Yes I found a thread from 2018 about scaling the dekas this is what I found apparently nascar America run the 60lb and 80lb so must be reasonable I'm hoping to tune mine for 12psi actuator I just installed so I'm wanting to scale the dekas and then play with the boost
I already have a larger front mount cooler
Gt3582 ba xr6t
3 inch to 3.5 inch exhaust
12psi actuator came with extra springs
Deka 650 60lb injectors currently run bosh 42lb but thought I'd give it head room
Walbro 450 fuel pump
Still have a 4 speed auto in it so would be nice to find a file to compare in the auto with the setup I have and to tweak it a little bit more where its needed
If any one has a file that has the 60lb injectors and 12psi actuator with the ba 4 speed file that would be awesome
I have got the tune working off a manual tune and box shifting but when under hard throttle it slips abit if you get off it a slight bit it kicks up to the next gear I think it has to do with the torque tables tho
Need a file with haanfh4 60lb deka injectors and 120psi actuator if any one is willing to share for me to have a try
-
Can we get a injector database going for all tried injectors currently running 42lb bosh Green injectors on 58psi fuel pressure
Need Information for Siemens 60lb injectors on that base pressure in the ba xr6t
Would be nice to have a sticky going like on the evo forum
-
Yes with bf f6 tables for vct etc
-
32 degrees
-
It's a ba ecu with a bf f6 rom flashed in out of a 6 speed manual but I have changed it to work with the 4 speed auto only found in the ba falcons
-
Got these resurts on my ba xr6t auto
-
Mate if this helps I'm running a ba xr6t with a 4 speed auto on a manual bf f6 typhoon tune and I got it shifting the auto box properly and have got ghost cams played with bit better timing in the vct setup too
HOWTO: BF Manual Launch Control / Flat shifting and Torque Requester's explained
in Falcon HOWTO Guides
Posted
launch switch is set on 1 aswell in auF1215