Jake
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Jake
-
-
On 12/5/2022 at 12:21 PM, Bill said:
FORScan can't program PATS on FGII. They only support up to FG1 & haven't cracked the algorithm for FGII
That's correct.
Having issues now with P2110-40 and P0701-20
Goes into limp mode and check engine.
Anyone got any ideas, have I missed something.
Thanks,
Jake.
HAEK2NE - TURBO PCM SWAP - 1000cc - 3bar MAP - OL BOOST - NO BOOST SENSOR - NO OIL TEMP - R6.tec
-
Couldn’t find you on Facebook/messenger.
this is that green one again. -
I’m working with an FG mk2 xr6 NA auto, the customer has swapped in a turbo zf trans, gas motor and fitted a turbo.
1st issue - throttle body actuator dtc and limp mode on gear kickdown. Other than that seems to work fine.
2nd - we fitted a turbo pcm but cannot perform pats reset. Not supported on oil
anyone completed a mk2 Fg pcm swap or na to turbo conversion shine any lights?
thanks.
jake. -
I was afraid that might be the case, they have already assembled everything and dropped it off. I’ll have to have a chat and see what they want to do.
thanks again for the help. -
Hey all,
I’ve got a fgmk2 na xr6 retaining the na pcm where they have :
fitted a turbo
swapped in a turbo zf trans
and it’s got a gas bottom end.
is there a way to get this trans to work with this pcm?pcm HAEK2AE
tcm 8R29-7J105-EG
pcm desired cal level is 12
tcm cal level is 4
thanks.
-
That’s what I thought they did.
Thanks Roland.
-
Hey guys,
Ive got a miami brand new PCM with NO VIN programmed. Trying to run it as a standalone, just checking, with PATS disabled will it bypass the VIN check?
We are getting no fuel pump prime and obviously no fire, but also no comms through the vehicle OBD port. its fine on the bench.
Put it in my f6 to check and we have comms but no prime.
does this point to wiring? or does it need a VIN? File attached
Thanks in advance.
Jake.
-
I’ve got a BA already using custom OS, is there a way to add the full vct control to this without licensing the full 7 credits again?
thanks
jake.
-
Sign me up!!
thanks.
-
21 minutes ago, Roland@pcmtec said:
There is an arbitrary limit of 8 at the moment, only because no one has logged more than 1 input to date.
No dramas, I’m a little way of having all my instrumentation finished (need isolation cash😉)so 8 will do for a bit.
thanks,jake.
-
On 6/9/2020 at 10:32 PM, Jake said:
Is it possible to use the 20 Chanel version?
https://www.digikey.com.au/product-detail/en/dlp-design-inc/DLP-IO20/813-1027-ND/2135093Is there a limit in the software as to how many aux analog channels can be logged?
thanks
jake.
I will find out tomorrow
-
Is it possible to use the 20 Chanel version?
https://www.digikey.com.au/product-detail/en/dlp-design-inc/DLP-IO20/813-1027-ND/2135093Is there a limit in the software as to how many aux analog channels can be logged?
thanks
jake.
Fg mk2 na to turbo issues.
in PCMTEC Editor Questions
Posted
Forgot to add, still using the NA loom.
Jake.