[fg xr6 turbo manual engine loom swaped from auto engine loom]

hey all

 

I converted my turbo fg sedan to manual quite sometime ago and I never did anything with the loom. I still retain the auto ecu mind that.

so I finally got my hands on a manual fg turbo engine loom and swapped it all out, now when I've gone to start it, it comes up with a system coms error and wont turn over.

I had a play with the pats switches

AUF16595 (pats)

AUF16527 (pats Alt)

AUF0362 (Pats Alt Cluster Switch)

 

I managed to get the car started and running but because I've disabled Pats system the ICC, Cluster and Obd2 have been disabled as well, I'm wondering if anyone has changed the auto loom out with the manual loom (still retaining the Auto PCM) and managed to get it all working together again. 

I cant connect to the ecu what soever once pats is disabled, I have to reconnect the auto loom and the read the PCM in recovery mode and reset it back to my previous tune.

 

any help would be much appreciated.

Thank you 

 

[Fg Xr6 Turbo runs fine till gets up too operating temp then sounds like it has no compression upon start up]

hey guys a bit of a headache here, car runs fine when its warming up, once up to operating temp starts to run a bit shit and progressively gets worse till the point of stalling. when trying to start again it sounds as there is no compression. im thinking the intake cam is getting stuck open but once it gets flashed with the sct there is no issue. here is the tune if anyone can shed some light it would be amazing if someone had some help

cheers 

info on the car also-

e85 10.5-1 compression 

atomic pistions and rods

stainless o'ring headgasket 

0.05 over inlet and exhaust valves 

mild port job

hoontune ht2 cams still retaining vct

 

v8EATER SP1 & SP2.tec