BarbysG6E
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by BarbysG6E
-
-
Following!
-
Thank you for the response I thought that might be the case, my elm went straight in the bin it was dead on arrival a few years back
-
Is there a way to use the Openport 2.0 adaptor the access MS CAN with forscan
I need to disable police mode in a G6E but I can't pick-up the instrument cluster?
I know the eBay spec elm adaptors have a manual switch but I only have the op 2.0
-
Out of curiosity I tried this on my mates straight piped BA, sitting on the 3k neutral limiter was deafening and made for a fun Saturday night! Thanks for the advice 🙂 I'll put up a video later
-
I was finally able to try a few different settings results in the video.
- ETC disabled via auF0265 & auf0264
- auF1479 set to 0.8 Lambda
- RPM limit 4850 and fuel cut 5000rpm for testing
- Time and amount that rpm limit can be exceeded both set to 0
- auF0262 Engine speed limiting set to 0.6
- auF0261 Engine speed limiting set to 1
Im going for something more agressive similar to @misk any feedback would be appreciated
-
Has anyone successfully changed from the soft limiter to something that resembles the classic "wun-dun" from the sohc?
Looking at certain settings under RPM limit but I haven't tried anything yet looking for some input 😀 cheers
-
I'm looking to experiment with Ghost cams, some decel crackles etc.
Just wondering if PCMTec professional would give me access to the required parameters to do this with a SY 2007 without having to use workshop features like flashing a different OS?
I understand that multitune via cruise control won't be available
Thanks Guys
Force cooling fan on with engine off
in Engine Tuning (US)
Posted
I wonder what triggers the fan to stay on after the key is out sometimes after a decent flogging