Kirby@PCMTec Posted September 3, 2021 Share Posted September 3, 2021 Hey Guys, Obviously the big one in 2.1 is included support for a whole raft of new FGEC (Ford Gasoline Engine Calibration) Processors and subsequent vehicle support. FGEC is a vastly different operating system and software layout from the FOA PCM's we have previously supported so it has required a huge amount of engineering to get this far. The following table outlines vehicle support for 2.1 : Ford Falcon BA/BF/FG, Territory (Petrol) FORD 2004-2017 We include support for all known petrol and LPG models including supercharged Coyote 5.0 V8, 6 cylinder NA and Turbo and LPG EcoLPi. Mustang - 6th Generation* FORD 2015-2021+ We include support for all known factory models including EcoBoost and V8 variants. Limited support for some performance models. F-150 - 13th Generation* FORD 2015-2020 We include support for all known gasoline models including EcoBoost and V8 variants. No Diesel Support. The following new processors are currently supported (in addition to the FOA Black and Spanish Oaks): TC1791 (Generally: 1st and 2nd Gen Coyotes - PFI only, and 2015-2018 Cyclone PFI 3.5 V6 ) TC298 (Generally: 3rd Gen Coyotes PFI/DFI, F150 3.5L Ecoboost DFI, 2.3L Ecoboost DFI Mustang) TC277 (Generally: F-150 3.5L Ecoboost DFI) TC1767 and TC1797 are partially supported for read but editing/writing is not currently supported. 2.1 Strategy Browser. To improve the sorting of strategies in our database it is now separated into Falcon (FOA) and Tricore (FGEC) lists. We have attempted to identify strategies, looking for transmission type markers, cylinder counts, capacity calculation, max load, flex fuel support and cylinder air charge values. Where these are not populated its generally due to the parameter data being unavailable due to software version/changes, we will continue to improve our methodology. You can sort by any of the fields to help identify strategies that might be of interest eg vehicle type can also sorted by S550 (Mustang) P552 (F150) etc. Stock File Support Much like Falcon you can select any strategy from the list and create a stock file, here is the current best method. Once you have found the strategy you want, select the name in the list - press "CTRL+C" (copy) Navigate to Calibration Tools > Create Stock File/Calibration Merge Create Stock File From Catch Code In the code box press CTRL+V (paste) and push create This will recreate the stock file for that strategy code from our servers. This dialog is universal for both old (FOA/Falcon) and new (FGEC/Tricore) Strategy codes. Happy Tuning! 3 Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.