Jump to content

2005 turbo territory btr won’t go into 4 th gear .


Recommended Posts

Hi , have a healthy turbo 2005 Territory (460 rwhp )  . We’ll was Na now Fg turbo . 

This problem has been coming on over the last week or so . First noticed it when I was boosting of in 1 st . It would just hit the limiter and not change unless I backed off my right foot a tad .

Today , while coming up on holidays, over took a camper van and it just smacked the limiter and after safely getting back in the LH lane . It wouldn’t go into 4 th or convertor  wouldn’t lockup  . Would go 1 st, 2 Nd , 3 rd at conservative throttle but not change to 4 th . But trump throttle would smack the rev limiter and the taco couldn’t keep up to the revs that was happening. 

Have reset to factory setting and through forscan ( no error codes came up Eg solenoid ) I reset the box but still the same .

So have I lunched my btr or is it a 4 th gear solenoid problem or is the box just down on fluid ( I serviced it 6 weeks ago with oil coming out of the fill point at about 50 deg c ) ? Don’t have any tool to check as I’m on holidays. 

Any help would be greatly appreciated? 
regards Graham.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...