[Need ORI file for BA XR8]

this is what its doing, idle is normally a lot worse then this 

 

[Need ORI file for BA XR8]

Hi, I am on the hunt for an ORI file for this BA XR8, the editor does not show an ORI for the tear tag A3AK & PCM MODEL ABU-251, or is there another SW version that is the same I can use ???

long story short, I'm having issues with this customers car after he attempted to knife edge his throttle body..... we have replaced the throttle body and still having the same issues as it come in with, wont idle right and keeps throwing 2 DTC's 

- Code: P1270 - Engine RPM or Vehicle Speed limiter reached

-Code: P2110 - Throttle Actuator Control System - Forced Limited RPM

it has been tuned with an STC tuner and has had the PCM replaced by another shop witch iv tried to correct, not I'm not sure on the ORI file that was used and I want to rule out the "ORI" file that's on the PCM being the issue.

 

any help would be great!  

 

I have attached the file that car come in with.

ORI AS ARRIVED.tec

[blowing lots of smoke]

so far iv "replaced" the cat...... and changed spark plug to a different heat range and all is ok so far 

[blowing lots of smoke]

yeah its struggling to make 400rwkw, the dump pipe is coming off it today to have a look at the back of the turbo so ill get the boys to check the cat out to, cheers guys 😃

[blowing lots of smoke]

the only time it smokes like that is when it hits rev limiter to other wise its pretty well clean

[blowing lots of smoke]

turbo is only like 3000km old, I wouldn't think they would be stuffed but worth having a look at, and its not eating oil either.

it smells like straight fuel to.

[blowing lots of smoke]

anyone ever seen this ? its got me beat haha

mod's -

built motor

stage 3 PW intercooler + pipework 

2000cc injectors

pro charge 6767 turbo 

full 4" exhaust system

460 intank pump

GFB fuel reg 

 

the tune is far from finished, AFR drops into 11.8 nice and holds through out the run and running 20psi boost on 98 octane.

 

any ideas would be great ! cheers 😃

 

 

[HOWTO: Ghost Cam and VCT simplification]

Hi everyone, iv got a customer in that is complaining about his ghost cams " stumbling " and stalling at times when coming to a stop, has anyone come across this ?  

 

not the best video of the stumbling sorry 

 

is an FG mk1 xr6t manual 2010