Jump to content

Cruise Control Flashing when engaged


Darryl@pcmtec

Recommended Posts

We recently had a customer who converted to a Multi Tune and after converting the vehicle the cruise control would just flash (on the dash) when trying to engage cruise control. The way to get it to not "flash" was to start the car with the brake on. Here is an extract from the workshop manual that states they should all do this:

image.thumb.png.ac115684c85e42d670cfa378d734c53a.png

Now this is not what the original car did but resetting it back to stock and this behaviour was still happening. 

The resolution for this is to reset auF2648 back to the stock value. We found it had been changed from 3 which works on a MK1 to a 1 which works on a MK2. auF2648 is the Hardware Configuration of the Brake Switches and can be found under the "System Switches" Navigator entry: 

image.png

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...