Jump to content

Automated Axis Rescale


Roland@pcmtec

Recommended Posts

Previously we have had an axis rescale feature which will reinterpolate any referenced tables when you modify an axis. This feature was hidden behind a right click context menu and was rarely used. The feature can be seen below.

This functionality is now automatically prompted whenever you modify and close an axis. This is available in version 2.10 and newer.

In this example you can see there are 26 borderline knock tables which share the same axis. If you were unaware of this or forgot to rescale them all, you could cause your self some serious issues.

image.thumb.png.2d1992f83e96b6b6f9e7fed937e5e431.png

After modifying the axis and closing it, it will now prompt you to auto interpolate all of these tables to handle the new breakpoints.

image.thumb.png.d70cc342257dc60a6df065dac4ffdf6b.png

This should prevent mistakes and help new users become aware of these workflow tools which can save quite literally hours of time.

image.thumb.png.96076db44706ad952cd1ce3c89053cec.png

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...