EddieKepper Posted September 18, 2018 Share Posted September 18, 2018 hey all I converted my turbo fg sedan to manual quite sometime ago and I never did anything with the loom. I still retain the auto ecu mind that. so I finally got my hands on a manual fg turbo engine loom and swapped it all out, now when I've gone to start it, it comes up with a system coms error and wont turn over. I had a play with the pats switches AUF16595 (pats) AUF16527 (pats Alt) AUF0362 (Pats Alt Cluster Switch) I managed to get the car started and running but because I've disabled Pats system the ICC, Cluster and Obd2 have been disabled as well, I'm wondering if anyone has changed the auto loom out with the manual loom (still retaining the Auto PCM) and managed to get it all working together again. I cant connect to the ecu what soever once pats is disabled, I have to reconnect the auto loom and the read the PCM in recovery mode and reset it back to my previous tune. any help would be much appreciated. Thank you Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted September 18, 2018 Share Posted September 18, 2018 First turn PATS back on, ensure your VIN is the same as the original auto PCM then do a parameter reset with Ford IDS or Forscan (requires an extended license which you can get for free as part of their beta program). This will re-link all of the modules and the vehicle will then start. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.