Jump to content

engine backfire at 4584rpm


Austen

Recommended Posts

g,day, Im new to all this data logging and have notice a spike on my cam overlap that jumps to over 200 degress at the start of log at idle. then on a pull after that it made a pop noise that sounded like from exhaust and engine cut out. started up straight away and idle,drove fine after woulds. is a 2003 ba ford xr6t ute have just replaced waste gate solenoid day before as was boosting over 20psi motor is built but has all stock exhaust, intake intercooler and wastegate.

all ive done was up the idle through pcmtec

dtc codes

P0320-63    engine speed output signal error

P1270-63        vehicle over speed condition

P2105-63      eletronically controled throttle motor error

P2110-63     throttle actuator control system - forced limited rpm

 

 

 

 

4584rpm exhaust pop engine dies.teclog

Link to comment
Share on other sites

  • 11 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...