TehNewbie Posted July 8, 2023 Share Posted July 8, 2023 Hi guys, I have the (attached image) error, and I can’t read my PCM at all. I’ve asked a few people, and no one has seen this error before… does anyone have any idea? I can still start and drive my car. But I just can’t read the tune no matter what!!! thanks for the help I’m advance! Quote Link to comment Share on other sites More sharing options...
Bill Posted July 8, 2023 Share Posted July 8, 2023 Your trying to read using version 1.24 which is "Flash Only". PCMTEC Editor is required to read, return to stock, tune & flash 1 Quote Link to comment Share on other sites More sharing options...
TehNewbie Posted July 9, 2023 Author Share Posted July 9, 2023 Hi bill, you are right. Thanks for the help, silly mistake overlooked as I was updating the software. Now I am trying to read the PCM, I get a few % and get Flash error. See attached pic. any clue? Quote Link to comment Share on other sites More sharing options...
Bill Posted July 9, 2023 Share Posted July 9, 2023 I haven't seen that error before. Are you using a genuine Tatrix cable? Have you tried reading in recovery mode? Quote Link to comment Share on other sites More sharing options...
TehNewbie Posted July 9, 2023 Author Share Posted July 9, 2023 Hi Bill, Turns out my issue was using an OBD splitter to get multiple OBD ports for gauges. When I go direct, problem solved. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
Bill Posted July 9, 2023 Share Posted July 9, 2023 No worries, you're not the first to have problems when they've had gauges or clusters plugged in at the same time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.