dantob Posted September 3 Share Posted September 3 I want to install and enable the engine oil temperature sensor in my tune. This seems simple enough on its own. The issue that I've run into though is that the usual EOT analog input pin (A13) is already assigned to the Fuel Rail Temperature sensor on the LPI engine (I'ts an LPI only problem). I was wondering whether it is possible to assign it to another analog input pin, for example: I'm not using the downstream O2 sensor and catalyst monitoring and have it disabled. Is it possible to repurpose this input as the EOT input. I currently have the professional edition, but can't see any way to do this. Thanks for any help. Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted September 3 Share Posted September 3 The IO is assigned by the RTOS which is not writeable. You need to change the PCM or be the first to experiment with a BDM and try and clone the Rtos from a different PCM Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.