Adding an extra injector or two

[Dodgy]

Hi guys does anyone know if a std ecu injector driver will support piggy backing in a second injector to open same time? Or if i could add a driver to run more injectors. Im fitting a supercharger and want to run it wet  with extra 2 injectors behind throttle body to keep it cool and add more fuel. Ie methanol. Only a track car for burnouts and so on 

[Roland@pcmtec]

One way to find out. Also make sure you wire them in parallel, if you wire in series it will drop the current through the injector you are piggy backing off due to increased resistance.

A better way would be to run a water meth pump off the IMRC runner output which can be setup to turn on/off at a rpm and map pressure setpoint.

[Dodgy]

11 hours ago, Roland@pcmtec said:

One way to find out. Also make sure you wire them in parallel, if you wire in series it will drop the current through the injector you are piggy backing off due to increased resistance.

A better way would be to run a water meth pump off the IMRC runner output which can be setup to turn on/off at a rpm and map pressure setpoint.

Yer i will give it a crack on the stock motor nothing to loose on that one lol. I want to run the charger wett all the time it runs methanol now and i plan on the 2 extra injectors to add a bit more fuel to keep it happy as it cops a flogging. Missis skids to and it spends 1m 30s on limiter at a time. She no lift lol