Jump to content
PCMTEC Forums
Roland@pcmtec

HOWTO: Multi Flash Tune (MFT) in conversion vehicles without a factory dash.

Recommended Posts

We get asked regularly how can multiple tunes (MFT) be installed toggled in a conversion car that does not have the factory dash/cluster. There are several possible solutions here.

Firstly if you have a barra Patrol conversion (very common). CANBarra make a module which will translate the canbus to drive factory Nissan tacho/speedo and cruise control buttons.

https://www.facebook.com/CANBarra/

The above setup can then be tested with our dash emulator. This would allow testing/developing a multi tune on the bench if required.

If you have a different conversion car and you are not using a canbus driven tacho/dash then you can operate a dual tune or an infinitely variable boost/power tune from either a toggle switch, or a rotary dial. This could be set up as high boost/low boost, or a 10 stage boost dial, or simply an e85/98 tune.

For details on how to do this, see the wiring instructions in the following how to guide.

If you can transplant a factory dash then the following guide explains how to set up the MFT in a normal factory car.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...