Jump to content

brenden

Members
  • Posts

    33
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by brenden

  1. this is what its doing, idle is normally a lot worse then this IMG_2269.MOV
  2. Hi, I am on the hunt for an ORI file for this BA XR8, the editor does not show an ORI for the tear tag A3AK & PCM MODEL ABU-251, or is there another SW version that is the same I can use ??? long story short, I'm having issues with this customers car after he attempted to knife edge his throttle body..... we have replaced the throttle body and still having the same issues as it come in with, wont idle right and keeps throwing 2 DTC's - Code: P1270 - Engine RPM or Vehicle Speed limiter reached -Code: P2110 - Throttle Actuator Control System - Forced Limited RPM it has been tuned with an STC tuner and has had the PCM replaced by another shop witch iv tried to correct, not I'm not sure on the ORI file that was used and I want to rule out the "ORI" file that's on the PCM being the issue. any help would be great! I have attached the file that car come in with. ORI AS ARRIVED.tec
  3. so far iv "replaced" the cat...... and changed spark plug to a different heat range and all is ok so far
  4. yeah its struggling to make 400rwkw, the dump pipe is coming off it today to have a look at the back of the turbo so ill get the boys to check the cat out to, cheers guys 😃
  5. the only time it smokes like that is when it hits rev limiter to other wise its pretty well clean
  6. turbo is only like 3000km old, I wouldn't think they would be stuffed but worth having a look at, and its not eating oil either. it smells like straight fuel to.
  7. anyone ever seen this ? its got me beat haha mod's - built motor stage 3 PW intercooler + pipework 2000cc injectors pro charge 6767 turbo full 4" exhaust system 460 intank pump GFB fuel reg the tune is far from finished, AFR drops into 11.8 nice and holds through out the run and running 20psi boost on 98 octane. any ideas would be great ! cheers 😃 video-1610425157.mp4
  8. Hi everyone, iv got a customer in that is complaining about his ghost cams " stumbling " and stalling at times when coming to a stop, has anyone come across this ? not the best video of the stumbling sorry is an FG mk1 xr6t manual 2010 IMG_1265.MOV
×
×
  • Create New...