Austen Posted January 1, 2023 Share Posted January 1, 2023 Hi, on a data log my injector pulse width just read a constant 0 is this because I'm using enthusiast and need to upgarde? Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted January 3, 2023 Share Posted January 3, 2023 On 1/1/2023 at 9:24 PM, Austen said: Hi, on a data log my injector pulse width just read a constant 0 is this because I'm using enthusiast and need to upgarde? Can you try pressing the + button to increase the decimals. Or alternatively check what the units are, it may be set to seconds with not enough decimal places. Set it to milliseconds with 2 decimal places and you should see a meaningful number. Quote Link to comment Share on other sites More sharing options...
Austen Posted January 3, 2023 Author Share Posted January 3, 2023 So would that be in log adjust range min and max? Quote Link to comment Share on other sites More sharing options...
Roland@pcmtec Posted January 11, 2023 Share Posted January 11, 2023 On 1/3/2023 at 11:37 PM, Austen said: So would that be in log adjust range min and max? The decimal places in the bottom left of the Log section. Have a read of the datalogger manual for more information under the help menu. Quote Link to comment Share on other sites More sharing options...
Kirby@PCMTec Posted January 19, 2023 Share Posted January 19, 2023 Hey @Austen Did Roland's advice help? did increasing the decimals fix your issue. I will check and see if we can add a default in for that level. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.