Xr6t3984 Posted January 19, 2023 Share Posted January 19, 2023 I have put a turbo ba motor into my n/a xr6 Ba Ute what is some things I should know before I start playing around with the tuning capabilities so I don’t Grenade the engine it runs but it splutters a bit at idle and Its running super rich eating fuel I’m going to buy a gfb electric boost controller cause I have been told the stock ba ecu’s Cannot control the boost with the solenoid and I have installed a turbo map sensor Quote Link to comment Share on other sites More sharing options...
Xr6t3984 Posted January 19, 2023 Author Share Posted January 19, 2023 (edited) By “playing around” I mean I am slowly learning with a friend. I’m also wondering if anyone has a stock ba xr6 turbo Ute tune as I don’t have access to the Ute Ecu the motor came from, apparently it would be easier to start with the factory tune and go from there? I’d even be willing to pay for a basic tune so I don’t hurt my engine while I’m learning so I have a reference point to start from Edited January 19, 2023 by Xr6t3984 Quote Link to comment Share on other sites More sharing options...
BeerTurbo Posted January 21, 2023 Share Posted January 21, 2023 turbo map sensor. check. do you have the 4 bar turbo fuel pressure sensor? how do you know its rich, do you have a AFR gauge installed? 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.