Jump to content

desired boost setting

Recommended Posts

i have a na ute with a turbo ba motor i want it to run 7 pounds of boost but it seems to just want to climb more and more above 11psi i just looked at my desired boost setting and it says it wants 16psi on all rev's? 


im running the stock n/a strategy with some changes to support the engine swap il upload here also

desired boost pcmtec .png

HAANGK2 turbo changes.tec

Link to comment
Share on other sites

That's reading in inches of mercury. Swap it over to psi and it'll read 7.9psi. From a quick look at the tune the boost will be rising due to the waste gate not working properly, it probably needs porting. Nearly all of the turbo scalars for boost control are set to 0 and the wg map is set to 0, so it'll be running gate pressure plus whatever it cant bypass through the wg. Also your spark axis is up the shit.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...