6R80 roll race parameters

[K44]

I've been looking and cannot find these parameters. They are defined in HPT as ECM 6321 and ECM 6512

 

([ECM] 6321 - Trans Select Shift Auto Upshift Switch: Switch that determines if automatic upshifting when in SST mode is enabled)

 

([ECM] 6512 - Trans Upshift Minimum Pedal Position To Upshift In Select Shift: Above this pedal percent, upshifts will be allowed in select shift mode.)

Thanks

 

[K44]

auF46405 labeled SST DD USFT is the same as ECM 6512

 

Still cannot find the on/off switch

[K44]

auF46414 is the on/off switch.

 

 

[Roland@pcmtec]

On 7/24/2023 at 10:03 AM, K44 said:

I've been looking and cannot find these parameters. They are defined in HPT as ECM 6321 and ECM 6512

([ECM] 6321 - Trans Select Shift Auto Upshift Switch: Switch that determines if automatic upshifting when in SST mode is enabled)

([ECM] 6512 - Trans Upshift Minimum Pedal Position To Upshift In Select Shift: Above this pedal percent, upshifts will be allowed in select shift mode.)

Thanks

Here you go. Appreciate your patience waiting for this, this is the first time I've had time to read the forums in a while (Christmas holidays lol), if you put a support ticket in and link the forum thread we will get onto these faster next time for you.

 

Gen 2 15-17s (These use AD° / Count not pedal % FYI)

auF46414 Automatically upshift at revlimit switch. 

auF46405  Upshifting allowed in SST when the pedal AD count is greater than this value

 

Gen 3 18+ (These use pedal %)

auF66680 Automatically upshift at revlimit switch

auF67388 Upshifting allowed in SST when the pedal AD count is greater than this value

 

These will get new descriptions with the next template update and recategorised so they are easier to find.

Please keep these coming, we have over 130,000 parameters to categorise and currently we do it based on a "usage metric" eg how often people change a parameter.  These are both relatively high in the list and would have gotten done reasonably soon, however if people ask we will do it as soon as possible.

Also someone has done some hard work here mapping ECM IDs to auF IDs. They have some done some of the common ones, obviously the Gen2 and Gen3 are very different with the 6R80 vs the 10R80 so they have different IDs though.

https://www.mustang6g.com/forums/threads/pcmtec.190584/post-3865944